Wednesday 4 November 2020

Termirons - 15/18mm Terminators / Necrons

Hello again all,
Here is my take on Terminator / Necrons.
Models are Kryomek Nexus Talos ( to be used as medium mecha ) , The Scene Heavy robots ( to be used as PA) , the Scourge ( to be used as Grunts) by Rebel Minis and Puppetwars cyber spiders ( to be used as repair droids )

I'm always on the search to paint minis as quickly & efficiently as possible, otherwise the lead mountain will remain just so.

These are metal minis so it would be counter productive to undercoat , basecoat , paint etc... so I said why not use the metal as a the final finish. Here's how to do it.

Blue / Black wash 
Then dry buff ( i.e. without a polishing medium ) to remove top most paint layer. Re do the wash if and where necessary.
Eyes and energy cell glow painted first with a GW Jade green + Vallejo Flo mix , then a small wash of GW Hexwraith glow finished by a light, light blue drybrush.

For the cyber spiders the buffing is not done as they're resin models.

I think they came out quite good and one good easily do an army very quickly.

Resistance is futile.....and they will be back 

Thanks for your comments.
Z














And here they are all finished , the funny thing is that I spent more time on the green glow effects than on the models themselves. Some of them took more than 6 thin coats to finish, Duncan Rhodes would be happy. Vallejo Flo Yellow + GW Hexwraith glow was used to build the glow bit by bit but the end effect is worth it.
Z


























Sunday 1 November 2020

Finished 15/18mm scifi Scratch Built Prime Movers & Gitungi vehicles


Hello again all,
Here are the Finished Prime Movers & Gitungi vehicles

You can see the starting point here


and here


I like painting gritty well used vehicles. Parade ground uniforms & vehicles are not my thing
unless they are specifically going to be used as such.

The bottom piece can be changed

Thanks for your comments. 
Z