GZG Lunar 18mm minis

Hello again all,

These are my Chinese ( Reddish Brass Visor ) & British ( Golden Visor ) Lunar infantry.
Very nice minis.

Mechs are 3D printed.

Still have to do vehicles or landers.

With hindsight, I should have taken the photos on a neutral background. Seems the paint job did it's work to camo them.😉

Chinese robots

Chinese & British robots

Chinese

British

British

Chinese

Thanks for your comments. 

 Z

18mm 3d Printed Power Armour by Red Pilgrim

These are some of the nicest power armour I have. Can't find the link , not sure if it was taken down.

They're by Red Pilgrim. Another great set of minis from a very good artist. 

Practical field design. 

The hefty six shooter and HMG are what I like best.

3D printed 18mm mini by Panthera for scale

Some slight  kitbashing was done. 

Thanks for your comments.

 Z

18mm 3D Printed FKMSA Destroyer Robots by Papsikels

Hello again all,

Another kitbashed set of robots ... you can never have enough robots !!!

I gave them 4 arms so as to be formidable killer robots. 

A bit delicate at 18mm so make sure that arms & ankles are shored up.

I used steel needles ( 0.7mm D) to fix arms in place as they were breaking off.

Human figure is an 18mm one for scale.

From here https://www.myminifactory.com/object/3d-print-fkmsa-battled-droid-destroyer-unit-a-181582

The bases are made up of the grid rafts used in 3D printing, so do not throw them away. 

The rust is real rust. Was cleaning some rusted metal parts with white vinegar & noticed that the residue

would be great to use as rust ( it is rust after all 😉).

It comes quite nice when dry..

Can be coloured & diluted for any effect one desires as the normal white vinegar bought in markets is mild & mostly water ( just check the percentage on the bottle ). Keep in mind it is still acidic, though , you DO NOT want to splash it in your eye.

Thanks for your comments. Z

18mm 3D Printed Aliens

This is my take on these Papsikels Aliens .

These

https://www.myminifactory.com/object/3d-print-grey-kind-outworld-invaders-233739

They're very nice minis if a bit fragile at the legs , so I modeled a tail out of putty to make them sturdier.

I tried to paint them as if they're phasing from shadow to light.

Human figure is an 18mm for scale.

Thanks for your comments.

 Z

18mm 3D Printed Robots from UNIT9

Hello again all,

Here are my 18mm 3D Printed Cyberpunk - CHIPs - Human Hybrids from UNIT9.

Very nice minis both in design concept and poses.

I did a lot of kitbashing on them to create more action poses. 

The human figure is a 15mm metal mini from Khurasan, for scale..

These are the base models.

https://www.myminifactory.com/object/3d-print-cyberpunk-chip-01-human-hybrids-301498

https://www.myminifactory.com/object/3d-print-cyberpunk-chip-02-human-hybrids-301499

Thanks for your comments. 

 Z

18mm Scratchbuilt Mechanicus Exploratory Survey Vehicles Jockey

Here's the pilot.

An inbuilt Gearhead 3D printed jockey.
Pity it isn't that visible once installed

Thanks for your comments. 

 Z