18mm 3D printed Mechs by Stationforge

Hello again all,

These are 18mm 3D printed Mechs by Stationforge .

I think they would be good as AT warhounds also.

Quite nice chonky , solid models. Love the heads especially.

If I were to do them again I would stick the shoulder guards to the weapons & not the body.

The magnetised arms are not sticking properly due to alignment  

OR

modify the arms so as to have magnets ( stick vertically not horizontally ) on their top part & modify the shoulder guards to take magnets.

Thanks for your comments.

 Z

Sprue Mechs ( finished )

You might remember these.

https://castrarunis.blogspot.com/2021/09/converted-1st-edition-spacehulk-termies.html

Well I finally finished them .... quite pleased with them.

Thanks for your comments. Z

3d Printed mechs by Filamentio ( 6 to 28 mm )

Hello again all ,

Here is a batch of 3d printed mechs by Filamentio . 
One of the best artists for mechs imho.
Could be used with 6 to 28mm minis, just note that some of the detail is delicate at this scale.

Infantry fig is an 18mm one.

Thanks for your comments. Z

Scratch built Desert dwellings 2 ( Egg Carton boxes ) & Wood Bark hills

Hello again all,

You might remember these

 https://castrarunis.blogspot.com/2022/09/scratchbuilt-18mm-scifi-desert.html 

Well now I'm going to make something similar but with card egg cartons.
 As always Reduce, Reuse  & recycle.
Still a wip.
We'll see where this leads. Problem is ( as always 😉) when to stop !! Euro cent for scale.

Another good tip I discovered is that 3d resin clogged IPA ( or methylated spirit ) is VERY good for coating card or wood. It soaks very well. Evaporates & when left in the sun hardens to an almost plastic card strength. Becomes water resistant but NOT water proof though. It can also be used for basing if mixed with wood dust etc.

As seen on the wood bark chip hills below.

So if you want to reuse the used IPA to the last drop  DON't throw it away  and please do remember it is still dangerous.

                                    

And these are my wood bark hills . Simple yet very effective. Was going to paint them grey but decided to leave as is.  Euro cent for scale.

Thanks for your comments.

 Z

3D Printed 18mm Colonial Marines

Hello again all,

These are the start of my 3D Printed 18mm Colonial Marines made by Panthera.

https://cults3d.com/en/3d-model/game/pwmp-25036-mefp-command-element-strike-pack

https://cults3d.com/en/3d-model/game/pwmp-25034-mefp-gpmg-gunner-strike-pack

https://cults3d.com/en/3d-model/game/pwmp-25031-mefp-marine-riflemen-skirmish-pack

https://cults3d.com/en/3d-model/game/pwmp-25037-mefp-recoilless-rifle-team-strike-pack-panthera_warforge

 

Quite nice chonky minis.

The sentry gun & flamers are kitbashed.

More to come.

Thanks for your comments. 

 Z

18mm 3D printed Power Armour by Crimson steel mechworks

Hello again all,

These are my kitbashed 18mm 3D printed Power Armour by Crimson steel mechworks.

They are all freebies & are quite nice minis.

The group photo is their real colour, a bit of sun makes a huge difference when taking photos.

Thanks for your comments.

 Z

3D Printed 18mm Castellax Mechs

Hello again,

These are 3D Printed Castellax Mechs from The Makers Cult.

Can be used in a steam punk, WWW2 or Scifi setting.

Quite nice minis.

Commander + MG42 + open hatch are from other kits.

Thanks for your comments.

 Z

10,12 or 18 mm 3D printed Steampunk / Scifi Mechs

Update 10/02/26 - Finished Pics added below.

Truth be told printed at this size they are more 10 - 12mm scale , when comparing the grey mini to hatches. The camo was done using 1 ,2 & 3 mm square stamps cut from one of those not cork wine bottle stoppers. Very handy.

Hello again all,

These are my 10,12 or18 mm 3D printed Steampunk / Scifi Mechs.

These are Rose Gold Pewter Support Walkers.

Very nicely detailed models  ( e.g. the welded lines on top of the hull of the one with 4 exhausts ) . I quite like the wheels which remind me of Dreampod 9 mechs.

The weapons especially the long rifle are great also.

The minis are 12 & 18 mm.

These models would fit perfectly in a steampunk setting like Scoutsifer's Oil & Iron but also a scifi one.

Thank you for your comments.

 Z